Adjusting the link of an Argon Norway watch is both easy and practical, since you don't have to go to a watchmaker. So now I'm going to show you how to do it, so that your watch fits you perfectly. 

Each watch comes with an adjustment tool. You can find this in the chest, to the right of the clock box. It consists of three parts - a plate, a screw and a metal tip. It also comes with three extra metal tips as a backup for the first one.

The first thing you do is unscrew the screw. Then you screw on the tip, and put it back into the plate. 

Now you are ready for the most important part, precisely adjusting the link. Inside the link there are needles, which you push out to remove individual parts.  You push out on the round part of the needle, and back in on the split part. So since I am now going to remove links, I have to push out here.

Then it's very easy: screw the metal tip towards the needle, and screw it until the needle comes out on the other side. Then you do it again, to remove a link. Then you can attach the link again temporarily to test the size. It is then important to insert the needle with the round side first. Once you've put the needle back in, push it all the way in with the other side of the alignment tool. In my case, the link was a bit too loose for my taste, so I'm removing a couple more links. The most common is to remove around 3-4 links.

And there you have it, an Argon watch that fits you perfectly. Thank you for shopping at Argon Norway, and enjoy your watch.